Peep-Toe Flat Sandals

Womens peep toe flat sandals built for hot pavements: the toe is cut open so air reaches the front of the foot, the sides are open too, and a slim slingback strap holds the back of the sandal in place while you walk. The lining is a soft microfibre against the skin, and the footbed sits on a flat EVA sole under three centimetres deep, so the sandal stays close to the ground instead of pitching you forward.

How Womens Peep Toe Flat Sandals Stay On

A single strap crosses the back of the heel and anchors under the sole, which keeps the peep toe from sliding off without a buckle you have to adjust. Open side panels let the sandal flex with the foot on stairs and kerbs, and the plain single-colour upper wipes clean with a damp cloth after a day out.

Upper, Lining and Sole

• Upper: soft solid-colour upper, peep-toe cut (supplier lists the upper as an other-material, so no fibre name is claimed)
• Lining: microfibre
• Sole: EVA, glued construction, flat, 0 to 3 cm
• Back: slingback strap, open sides
• Colours in this batch: yellow, white and orange red
• EU sizes in this batch: 38, 39, 40, 41, 42, 43

Womens Peep Toe Flat Sandals Fit and Sizing

The supplier’s own size list runs CN 35 to 43 with no foot-length table, so this batch is listed in EU 38 to 43 on the size steps the shop already uses. Take your usual EU size. If your foot is wide or your instep is high, go one size up; if it is narrow, stay with your usual size and let the slingback strap do the holding. Measure the longer foot and use that number.

Care

Wipe the upper and the footbed with a damp cloth, then let the pair air-dry in the shade. Do not machine wash and do not leave the sandals in direct sun for hours: heat softens the EVA sole and dulls the colour.